A Guide on Septic System Inspection

When was the last time that you had your septic system inspected by professionals? We hope it hasn’t been that long. You see, your septic system requires regular maintenance and inspection just as the rest of your plumbing system does, most especially the tank. If you want to know what happens during a septic inspection, read on and learn from the best Pembroke Pines FL plumber!

WHAT ARE THE TWO TYPES OF SEPTIC SYSTEM INSPECTION?

Technically, there are two types of inspections: visual and full septic assessments. Visual inspections are limited or only involve basic examination of the system. These are typically performed when people buy homes and are done for the purpose of mortgage applications. However, you should remember that not all mortgage companies consider visual inspections adequate.

If you’ll have your septic system visually inspected, there are the things or the tasks that will be done:

1. The toilets will be checked to ensure that they flush efficiently.

2. The water supply in the house or building will be checked to ensure that it’s smooth and sufficient.

3. The location of the tank and the access pipe will be identified.

On the other hand, full inspections are thorough and complete. These assessments focus on the holistic efficiency and condition of the septic system. Because of full inspections, problems with your drainage system are also detected and resolved.

If you’ll request for a full septic system inspection, there are the things or the tasks that will be done:

1. The tank content level will be identified.

2. The tank will be checked for leaks.

3. The drainage or septic lines will be inspected for tree root intrusions.

4. Backflow prevention testing will be done.

5. The dividing wall and baffles will be checked for issues.

6. The septic tank will be inspected to see if it’s already sufficient or if an upgrade is needed.

7. A sludge test will be performed.

WHAT IS A SLUDGE TEST?

A sludge test is also referred to as the “The Sludge Judge” or “The Stick Test”. This plumbing inspection involves the insertion of a long, plastic pole into the tank. This pole is marked in increments of a foot and has a stopper at the end that allows sludge and other waste materials to get inside it. Once inserted, the sludge will get inside the pole and the professional plumbers should be able to see how much solid wastes the tank contains.

WHAT IS SEPTIC TANK PUMPING?

When licensed plumbers discover that your tank already has too much solid wastes stored in it, they will pump the tank out. A special service truck with a large container will be brought to your place. This container is connected to a large siphon hose. The other end of the siphon hose will be inserted into your septic tank and used to suck out all the sludge or waste materials inside. The sludge will then be taken to a treatment facility and used on other productive means such as crop growing or energy generation.

We hope that we answered your questions about septic system inspection. Remember, you need a certified septic tank inspector to handle this kind of plumbing job. So to avoid inconveniences and mediocre performance, only call the best Pembroke Pines FL plumbers. Douglas Orr Plumbing provides reliable plumbing services in Pembroke Pines FL including septic system inspection in Pembroke Pines FL, sewer line inspection in Miami FL, Pembroke Pines FL backflow prevention services, toiler repair services in Pembroke Pines FL and many more! Call us at (305) 240-6731to schedule a service!

Bet you didn’t know that plumbers could be funny, too! Watch our video to crack up a little!